Before using the
crimp Tools, place the component to be crimped on a horizontal plane. At the same time, place the component to be crimped in the crimping pliers rack. Press the handle of the crimping pliers downward to grip the component to be crimped, adjust the knob to adjust the pressure properly, and hold the handle tightly until the crimping is complete.
Note the following points in crimping:
1, crimping sequence: from top to bottom crimping, each crimping should be uniform crimping of all parts of the components.
2, crimping strength: In the crimping to maintain a certain strength, do not use excessive force to crimp, so as not to damage the components. 3, in the crimping need to pay attention to the following points:
Crimping sequence: Crimping from top to bottom, and all parts of the components should be uniformly crimped each time.
Crimping strength: Maintain a certain strength when crimping, do not use excessive force to crimp, so as not to damage the components. 4, in the use of
crimp Tools, it is necessary to pay attention to avoid accidents caused by worry or distraction.